5000 Series
Wind-Certified Commercial-Grade Door

Fueled by constant changes in local and national building codes, as well as increasing insurance costs, doors with validated wind certification can dramatically reduce maintenance and replacement costs and minimize downtime. DBCI’s wind-certified doors are designed to meet stringent building codes in coastal regions and Florida.

	Curtain 26-gauge galvanized, Grade E hard steel Deep-ribbed corrugation with three-rivet windlock attachment Maximum opening size of 20’ x 16’ Flexible wear strips NOTE: The 5000 Series are wind rated up to 20’0” wide and approximately 120 MPH. The MPH rating increases as the door width decreases. For test results on doors up to 20’0” wide, please contact DBCI Sales at 800.542.0501.
	Approximate* MPH Certification 10’ wide = 150 mph 12’ wide = 150 mph 14’ wide = 146 mph 16’ wide = 140 mph * For test results on doors up to 20’ wide, please contact DBCI Commercial Sales at 800.542.0501.
	Bottom Bar 6063 – T6 aluminum extrusion 2” x 1 ½” galvanized angles Bulb astragal Stainless steel nuts and bolts
	Axle-Drum Assembly 1 5⁄16” O.D. steel axle, 14-gauge 11-gauge axle on doors over 10’ wide Utilizes 12”, 16-gauge drums Shielded steel ball bearings in drums Full top sheet Oil tempered torsion springs
	A.C.E. Guide System 12-gauge galvanized steel 12-gauge wind lock bar Adjustable bolt on head stop Polyethylene wear strip Pre-punched for lock and attachment fasteners
	Hardware Saddle clamps with set fasteners 10-gauge slide locks; 2 per door 16-gauge step plate; 2 per door ¼” steel angle T-bracket
	Opening Height Headroom Doors up to 10’ have 20” of headroom Doors 10’ to 14’ have 22” of headroom Doors over 14’ have 24” of headroom
	Options Insulated 5250 Series Chain hoist 8:1 reduction Header seal Hood Steel mounting plates Electric operator

back to top